Epoxy Flooring Services

Approx. Rs 45 / sq ftGet Latest Price

• Epoxy Resin: The primary component in the formulation, typically derived from bisphenol A (BPA), bisphenol F (BPF), or novolac-based resins.
• Hardener (Curing Agent): Common hardeners include amines, anhydrides, and polyamides. The resin and hardener must be mixed in the correct ratio to ensure proper curing.

• Low-viscosity epoxies: Used for applications like coatings, sealants, and low-fill applications.
• High-viscosity epoxies: Ideal for structural bonding and thicker layers.
• Viscosity is typically measured in centipoise (cP) or poise (P) at a specific temperature (often 25°C).

• Pot Life: The time frame in which the mixed epoxy resin and hardener can be used before the mixture starts to harden. This can range from 30 minutes to several hours, depending on the product.
• Cure Time: The time it takes for the epoxy to fully harden after application. This can vary from 1-24 hours at room temperature, but may be accelerated with heat.
  • Room temperature curing: Common for many general-purpose epoxies.
  • Heat-cured epoxies: Cure faster under heat and are often used for high-performance applications.

• Tensile Strength: Typically ranges from 40 to 120 MPa for structural epoxies.
• Tensile Modulus: Can range from 2,000 to 10,000 MPa depending on the formulation. This indicates the stiffness of the epoxy once cured.

Additional Information:

Approx. Rs 70 / Square FeetGet Latest Price

Additional Information:

Approx. Rs 40 / sq ftGet Latest Price

Approx. Rs 40 / Square FeetGet Latest Price

Approx. Rs 30 / Square FeetGet Latest Price

Approx. Rs 45 / Square InchGet Latest Price

Additional Information:

Approx. Rs 45 / Square FeetGet Latest Price

Approx. Rs 45 / sq ftGet Latest Price

• Type: PMMA (Polymethyl methacrylate) or acrylic.
• Grade: Extruded or Cast (Cast acrylic is more durable and has better optical clarity, while extruded acrylic is more cost-effective and easier to machine).

• Thickness: Acrylic sheets typically range from 1/16" (1.5mm) to 2" (50mm) thick, with custom thicknesses available.
• Standard Sheet Sizes: The most common dimensions are 48" x 96" (1220mm x 2440mm) or 48" x 120", but sheets can be custom cut to size.

• Clear: Most common, offers high transparency (up to 92% light transmission).
• Opaque: Available in a wide range of colors, including solid, frosted, or translucent.
• Textured/Frosted: Matte finish that diffuses light, often used for privacy panels.
• Custom Colors: Available in translucent, fluorescent, and custom-matched colors.
• Finish Options: Glossy, matte, frosted, or textured finish

• Density: Typically around 1.18 g/cm³.
• Hardness: Typically rated M-100 (Rockwell hardness scale).
• Impact Resistance: Acrylic is about 10 times more impact-resistant than glass.
• Flexural Strength: Around 10,000-12,000 psi (68.95-82.7 MPa).
• Tensile Strength: Approximately 7,500-9,000 psi (51.72-62.05 MPa).
• Modulus of Elasticity: Typically 450,000 psi (3.1 GPa).

• Light Transmission: Clear acrylic allows light transmission up to 92%.
• UV Resistance: Acrylic has good resistance to UV light, reducing yellowing over time, though UV-resistant coati

Additional Information:

Approx. Rs 40 / sq ftGet Latest Price

Approx. Rs 40 / sq ftGet Latest Price

Approx. Rs 40 / Square FeetGet Latest Price

Approx. Rs 230 / Square FeetGet Latest Price